Slitting - the process of cutting a coil of steel or aluminium into narrower strips - remains a key step in the production of profiles, tubes and extruded blanks. A properly set-up line will allow you to use the full width range of the coil, reducing cuts and shortening the part's passage through production.
The modern slitter line operates at speeds of up to 200 m/min, meaning that a typical 20-tonne coil can be cut into strips in a matter of tens of minutes. The strips are cut precisely to the width of the future bend or forming, eliminating the intermediate step of cutting sheets. The manufacturer saves both time and storage space – the strips go straight to the forming or pressing line.
Knife discs adjustable in increments of 0.1 mm guarantee a dimensional deviation in width of less than ± 0.15 mm. This minimizes "burrs" and rejects in subsequent operations. Material rolled back into coils takes up significantly less space than sheet formats, which facilitates internal logistics.
| Roll thickness | 0,3 – 3,5 mm |
| Minimum width of cut strip | 18 mm |
| Surface protection (foil, paper interlayers) | standard service |
The line in Bruntál is equipped with automatic feeding, which reduces the risk of tearing thin sheets. Upon agreement, the strips can be provided with a paper or PE interlayer to prevent abrasion.
Potřebujete kovové pásy na přesnou šířku bez čekání? Zašlete parametry svitku a požadovanou šířku na nebo využijte poptávkový formulář. Do 24 hodin obdržíte kalkulaci a termín dodání.
Slitting - the process of cutting a coil of steel or aluminium into narrower strips - remains a key step in the production of profiles, tubes and extruded blanks. A properly set-up line will allow you to use the full width range of the coil, reducing cuts and shortening the part's passage through production.
The modern slitter line operates at speeds of up to 200 m/min, meaning that a typical 20-tonne coil can be cut into strips in a matter of tens of minutes. The strips are cut precisely to the width of the future bend or forming, eliminating the intermediate step of cutting sheets. The manufacturer saves both time and storage space – the strips go straight to the forming or pressing line.
Knife discs adjustable in increments of 0.1 mm guarantee a dimensional deviation in width of less than ± 0.15 mm. This minimizes "burrs" and rejects in subsequent operations. Material rolled back into coils takes up significantly less space than sheet formats, which facilitates internal logistics.
| Roll thickness | 0,3 – 3,5 mm |
| Minimum width of cut strip | 18 mm |
| Surface protection (foil, paper interlayers) | standard service |
The line in Bruntál is equipped with automatic feeding, which reduces the risk of tearing thin sheets. Upon agreement, the strips can be provided with a paper or PE interlayer to prevent abrasion.
Potřebujete kovové pásy na přesnou šířku bez čekání? Zašlete parametry svitku a požadovanou šířku na nebo využijte poptávkový formulář. Do 24 hodin obdržíte kalkulaci a termín dodání.
